Our Key Milestones

2002

Incorporation of Winstar Aluminium in Malaysia on 15 January 2002.
Commenced operations in a rented single-storey factory located at Lot 6517, Sungai Puloh Est, Batu 5, Jalan Kapar, 41400 Kapar, Klang, Selangor with one aluminium extrusion line.  

2003

Moved to a new rented factory located at Lorong Kuang Bulan, Kepong, Kuala Lumpur.

2004

Moved to the Lot 46A facility, a new rented factory that came with two aluminium extrusion lines and relocated our existing one aluminium extrusion line from Kepong, Kuala Lumpur

2005

Purchased Lot 46A facility.
Purchased three anodising lines.

2006

Winstar Aluminium acquired 83.33% equity interest in Winstar Solar, establishing its first retail outlet cum warehouse in Klang, Selangor to expand the Group’s product offerings to include the trading and distribution of building materials.

2007

Established the second retail outlet cum warehouse in Kepong, Kuala Lumpur for the trading and distribution of building materials.

Purchased one new aluminium extrusion line.

2008

Winstar Aluminium began to fabricate, assemble and distribute aluminium ladders as an OEM.

2014

Winstar Aluminium acquired the remaining equity interest in Winstar Solar from a third party.

Purchased the Kepong Facility.

Moved our operations from the second retail outlet cum warehouse in Kepong, Kuala Lumpur to the Kepong Facility.

2015

Acquired the Ijok Manufacturing Facility which had a total built-up area of approximately 124,000.0 sq. ft. at that time.

2016

Relocated our operations from Lot 46A facility to the Ijok Manufacturing Facility whereby we relocated our existing four aluminium extrusion lines, three anodising lines, and added one new anodising line and one new powder coating line.

Winstar Aluminium acquired 100.00% equity interest in MIM Industry and subsequently expanded our product offerings to offer fabrication of aluminium ladders under our Group’s “Asteri” brand.

Winstar Aluminium acquired 90.00% equity interest in Establish Trading to expand the Group’s product offerings to include the distribution of aluminium curtain rails and accessories.

2017

Winstar Aluminium acquired the remaining 10.00% equity interest in Establish Trading from a third party.

2019

Winstar Aluminium acquired an additional three acres of a leasehold land in Ijok, Selangor (Lot 903), adjacent to our Ijok Manufacturing Facility, for the construction of new manufacturing facility.

2020

Winstar Aluminium was accredited with ISO 9001:2015 certificate from LRQA.

2022

Mestron Holdings Berhad, a company listed on the Main Market of Bursa Securities, acquired 10.00% equity interest in Winstar Aluminium.

2023

Vafe System, a subsidiary of Sunview Group Berhad, a company listed on the ACE Market of Bursa Securities, acquired 1,612,000 ordinary shares in Winstar Aluminium representing a 20.00% equity interest in Winstar Aluminium.

Winstar Solar started to carry out the business of trading of solar related materials and accessories, and the provision of solar PV system installation services to establish the Group’s presence in the solar PV industry.

Winstar Aluminium acquired an additional three acres of leasehold land in Ijok, Selangor (Lot 904), adjacent to Lot 903, for future expansion.

2024

Commencement of construction works for a new manufacturing facility on Lot 903.

Vafe System acquired 806,000 ordinary shares in Winstar Aluminium from Mestron Holdings Berhad, representing a 10.00% equity interest in Winstar Aluminium, resulting in Vafe System holding a total of 30.00% equity interest in Winstar Aluminium.

Winstar Aluminium began to fabricate aluminium solar PV mounting structures.

Competitive Strength

Our Competitive Strength

Established Track Record and Reputation

We have a track record of over 20 years in the aluminium extrusion market. Since we commenced operations in 2002, we have been manufacturing, fabricating, processing, and selling aluminium products as well as building materials. In 2008, we expanded to include fabrication and assembly of various types of aluminium ladders as an OEM and subsequently distributed our own “Asteri” brand from 2016. Our Group has also in 2023 ventured into the provision of solar PV system installation services.

Over the years, our aluminium products have been used in multiple buildings such as The Conlay (Kuala Lumpur), Bloomsvale Residence, The Vue @ Monterez and Papyrus @ North Kiara.

Our established track record and reputation has enabled us to continuously secure orders from our customers and generate revenue to further expand our products and services.

Comprehensive Manufacturing Facility

We undertake our aluminium extrusion, fabrication and assembly activities at our Ijok Manufacturing Facility. We have established a comprehensive manufacturing infrastructure at our Ijok Manufacturing Facility which houses our four aluminium extrusion lines, one automated powder coating line, four anodising lines, 10 fabrication and assembly tables for aluminium ladders, as well as an on-site warehouse. By having our key processes in one facility, we are able to control the quality of our products and efficiency of our operations.

Wide Range of Products

We offer a wide range of extruded aluminium profiles that can be customised according to our customers’ requirement. Our engineering department works together with our customers to design the die to be used to create the required extruded aluminium profile. We will then engage a third-party supplier to produce the die.

Under our trading and distribution of building materials segment, we offer building materials such as extruded aluminium profiles, stainless-steel products, aluminium products, silicone sealants, ironmongery products, among others, to our customers.

We have a total of approximately 4,900 stock keeping units (SKU) for our aluminium extrusion segment, and trading and distribution of building materials segment.

In addition, our wide range of products enable us to effectively serve our customers, especially from the construction industry, as we can provide convenience where we are able to offer both internally extruded aluminium profiles and building materials for construction works. Further, we generally maintain a stock level for fast-moving products to ensure availability of supply to our customers.

Our team

Key Senior Management

Our experienced management team comprises of a team of individuals with diverse work experiences which allows us to continuously cater and adapt to the changes in the aluminium extrusion market in Malaysia, as well as to provide customised solutions to our customers. Hence, we are of the opinion that our experienced management team will enable us to execute our future plans and further grow our business operations.

Quality Control and Assurance

As a testament to our commitment towards providing our customers with satisfactory quality products, we have been accredited with the following accreditations:

Standard
MS 2289:2010
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
  • Company
    Winstar Aluminium
    Winstar Aluminium
    Winstar Aluminium
    Winstar Aluminium
  • Standard
    MS 2289:2010
    ISO 9001:2015
    ISO 14001:2015
    ISO 45001:2018
  • Certificate No. / Approval No.
    PC005318
    ISO 9001 - 00026141
    ISO 14001 - 00045237
    HG24S2017R0M
  • Scope
    Aluminium and aluminium alloy - extruded shapes for windows and sliding doors
    Manufacturing of aluminium extrusion parts
    Manufacturing of aluminium extrusion parts
    Manufacturing of Aluminium Extrusion Parts and their locations
  • Issuing Party
    SIRIM
    LRQA Malaysia Sdn Bhd & LRQA Limited
    LRQA Malaysia Sdn Bhd & LRQA Limited
    Crown Certification Testing
  • Validity Period
    23 October 2020 -
    23 October 2025
    21 June 2024 -
    12 July 2026
    21 June 2024 -
    12 July 2026
    11 October 2024 -
    11 October 2027
Design & Development

Design & Development

We are involved in design and development activities with our customers, particularly for the design of extruded aluminium profiles for the fabrication of our customers’ products such as window frames and door frames. Depending on the features of our customer’s products (e.g. windows that open from the side or from the top versus sliding windows), we will work together with our customers to design the aluminium profile and the necessary die design. We will also conduct simulations of the aluminium profiles design using software to evaluate the properties such as wind loads, bending stress etc., to ensure the design is free from air and water leakage.

Future Plans

Future Plan & Business Strategies

01
Construction of new manufacturing facilities

Currently, our aluminium extrusion and fabrication activities are conducted at our Ijok Manufacturing Facility. We have commenced construction on Lot 903 which is adjacent to our Ijok Manufacturing Facility with the intention of expanding our production capacity. The Lot 903 Facility with an approximate built-up area of 80,000 sq. ft. is expected to house 4 aluminium extrusion lines and additional storage space.

The total estimated construction cost of the Lot 903 Facility of approximately RM14.50 million will be funded through bank borrowings and internally generated funds.

02
Purchase of aluminium extrusion lines

In line with our business strategy to expand our production capacity, we intend to purchase four additional aluminium extrusion lines with a combined capacity of 8,580 tonnes to be installed at the Lot 903 Facility to increase our aluminium extrusion capacity. We have four existing aluminium extrusion lines with a total capacity of 6,705 tonnes. The four new aluminium extrusion lines are expected to increase our total manufacturing operating capacity from approximately 6,705 tonnes per annum to 15,285 tonnes per annum.

03
Expansion of extruded aluminium products to be used in the solar PV industry

During 2023, we secured several purchase orders for the supply of aluminium solar PV mounting structures and were awarded contracts to provide installation services for solar PV systems. In early 2024, we have begun to fabricate the aluminium solar PV mounting structures.

Moving forward, we intend to increase our focus on the fabrication of aluminium solar PV mounting structures and expand our fabrication activities to include other solar PV related aluminium accessories such as brackets and clamps.